The best camera mounts depend on what you need to attach and where you need it: a monitor on a cage, a camera on a desk, or gear on a rail or handlebar. These picks cover adjustable arms, clamps, monitor supports, and camera-specific cages, so check the mounting interface and load limit before choosing.
Quick Top Products
SMALLRIG Magic Arm Clamp Kit
- The clamp is designed for both flat surfaces and round tubes.
- One knob adjusts the arm, with a recommended 1.5 kg load capacity.
- Includes an action camera mount.
Best For: Creators who need to position a small camera, monitor, light, or microphone on a table edge or round support.
SMALLRIG 9.8-Inch Magic Arm Clamp Kit
- The arm measures 9.8 inches (25 cm).
- The clamp opens from 15 mm to 54 mm.
- The kit includes a super clamp and articulating arm.
Best For: Filmmakers who want an articulating arm to place a monitor, microphone, or light away from its clamp point.
SMALLRIG 11-Inch Magic Arm Clamp
- The arm has an 11-inch reach.
- The mounting end combines a 1/4-inch-20 screw with retractable pins.
- The clamp fits tubes, tables, tripod legs, and stabilizer rings measuring 15 to 40 mm across.
Best For: Vloggers and studio creators who need an adjustable arm for an action camera, monitor, light, or microphone.
SMALLRIG 7-Inch Magic Arm Clamp
- The arm is 7 inches long.
- It has a 1/4-inch screw and retractable anti-deflection pins.
- The clamp fits supports from 15 to 40 mm in diameter.
Best For: Creators who want a shorter adjustable clamp arm for a light, monitor, microphone, or action camera.
SmallRig Cool Ballhead Arm Clamp 1138
- The clamp supports up to 1.5 kg.
- The mount combines clamps with a 1/4-inch-20 screw.
- The package includes a super clamp and action camera mount.
Best For: Creators who want a small clamp for a desk, rod, tube, or vehicle-mounted camera accessory.
SmallRig Field Monitor Mount BSE2346
- It fits 5- and 7-inch monitors.
- It swivels 360 degrees and tilts 140 degrees.
- The monitor weight limit is 1.2 kg.
Best For: Video shooters who need to attach a 5- or 7-inch field monitor to a camera cold shoe.
SMALLRIG Camera Monitor Mount 6313
- The mount attaches through a cold or hot shoe.
- It allows horizontal and vertical installation.
- It tilts 180 degrees and pans 360 degrees.
Best For: Video creators who want tool-adjustable monitor positioning and quick cold-shoe attachment.
SMALLRIG Monitor Mount EVF Holder 2174
- It fits 5- or 7-inch monitors weighing up to 1.5 kg.
- The monitor rotates up to 146 degrees.
- It attaches through a 3/8-inch ARRI locating hole.
Best For: Camera operators with an ARRI locating hole who need a monitor holder with hand-tightened rotation.
SMALLRIG Super Clamp with 1/4- and 3/8-Inch Threads
- The jaw accepts surfaces from 15 mm to 40 mm thick.
- It has 1/4-inch and 3/8-inch threaded holes.
- The package includes one super clamp.
Best For: Camera builders who need a standalone clamp with multiple threaded attachment points.
SMALLRIG GoPro Motorcycle and Bike Clamp Kit
- The clamp includes a removable action camera adapter.
- The ballhead rotates 360 degrees for portrait and landscape positioning.
- Motion guidance limits device weight to 350 g and speed to below 50 km/h.
Best For: Action-camera users who need a handlebar clamp and are prepared to follow the stated movement limits.
Friction Arm for Tables and Tubes
SMALLRIG Magic Arm Clamp Kit, Camera Mount Friction Arm with Super Clamp
This clamp kit pairs a magic arm with a crab clamp for mounting a small accessory on a table edge, tripod, or handheld ring. Its rotating triangular prism friction block helps the clamp grip flat surfaces as well as round tubes.
The single knob adjusts the arm, while the anti-deflection connection and cushioned contact points help keep the setup in place and protect the gear and clamping surface. The recommended load capacity is 1.5 kg, which makes this a fit for compact accessories rather than heavier equipment.
An action camera mount is included for compatible cameras.
Best For: Creators who need to position a small camera, monitor, light, or microphone on a table edge or round support.
| Pros | Cons |
|---|---|
|
|
Choose this arm if you want a compact mounting setup that can grip either a flat table edge or a round support. The friction block, single adjustment knob, and included action camera mount give it more flexibility than a bare clamp.
Keep the recommended 1.5 kg load in mind and confirm that the clamp opening suits your mounting surface. It makes the most sense for lighter cameras and accessories where adjustable positioning matters.
Long Reach with 360-Degree Ball Heads
SMALLRIG 9.8 Inches Magic Arm Clamp Kit with 1/4" and 3/8" Threaded Holes
The 9.8-inch arm and super clamp provide reach for positioning an accessory off a camera, tripod, shelf, or crossbar. Double ball heads rotate 360 degrees, and the clamp accepts openings from 15 mm to 54 mm.
Both the clamp and arm have rubber cushions to add friction and protect contact surfaces. The arm has 1/4-inch screws at both ends, while the clamp offers 1/4-inch and 3/8-inch threads for mounting.
This kit suits a flexible rig, though it is not magnetic and is not corrosion-resistant for seawater use.
Best For: Filmmakers who want an articulating arm to place a monitor, microphone, or light away from its clamp point.
| Pros | Cons |
|---|---|
|
|
Pick this kit when the accessory needs more reach than a short ballhead mount provides. Its 9.8-inch arm, wide clamp opening, and two thread sizes support varied rig layouts, while the cushions add grip at contact points.
Check that the support surface falls within the stated clamp range and that your mounting point has the right thread. The seawater limitation matters for marine setups; for those, choose a different mount.
11-Inch Arm for Adjustable Rig Positioning
SMALLRIG 11" Magic Arm Clamp with 1/4"-20 Screw & Retractable Pins
This 11-inch magic arm pairs a crab-shaped clamp with a 1/4-inch-20 screw and retractable locating pins. The pins help resist twisting when attaching compatible cages, while anti-slip pads cushion the clamp against tubes, tables, tripod legs, or stabilizer rings.
The clamp fits supports with diameters from 15 to 40 mm. A wing nut loosens the arm joints together for repositioning and tightens them to hold the chosen angle.
The maximum payload is 1.5 kg, so this arm is suited to smaller accessories. An Allen wrench is included for added tightening.
Best For: Vloggers and studio creators who need an adjustable arm for an action camera, monitor, light, or microphone.
| Pros | Cons |
|---|---|
|
|
This arm is a good fit when you need longer reach and want to reposition several joints with one wing nut. Its locating pins are useful for compatible action camera cages, and the clamp range covers common tubes and table edges.
Check your support diameter and the accessory's mounting interface before buying. The 1.5 kg payload limit makes it a poor choice for heavier equipment, even if the clamp itself fits the support.
Compact 7-Inch Magic Arm
SMALLRIG 7 Inches Magic Arm Clamp, with 1/4 Screw & Anti-Deflection Pin
This shorter magic arm uses a crab-shaped clamp and a mounting end with a 1/4-inch screw and retractable pins. Its 7-inch arm offers less reach than the longer option, which can be useful on tighter rigs.
The clamp accommodates tubes, tables, tripod legs, or stabilizer rings measuring 15 to 40 mm across. Anti-slip pads cushion the contact points, and a wing nut loosens the joints together for repositioning before locking them in place.
It supports a maximum payload of 1.5 kg. The package includes an Allen wrench for extra tightening.
Best For: Creators who want a shorter adjustable clamp arm for a light, monitor, microphone, or action camera.
| Pros | Cons |
|---|---|
|
|
Choose this version when you want an adjustable arm and clamp. The clamp range and 1/4-inch screw with retractable pins support several common camera accessories and mounting points.
Confirm that the support is within the stated diameter range and that your device can attach to the screw and pins. Its 1.5 kg maximum payload is the main constraint, so keep it for lighter gear.
Compact Desk and Tube Clamp
SmallRig Cool Ballhead Arm Super Camera Clamp Mount Double Ball Adapter, Fence Desk Table Mount for Ronin-M for Insta360, for Gopro - 1138
The SmallRig 1138 combines a super clamp with a dual ballhead adapter and an action camera adapter. Its 1/4-inch-20 screw and clamps support a range of gear, including cameras, monitors, lights, microphones, and action cameras.
The clamp locks to a rod, tube, table, frame, or tripod with a knob, without drilling. The listed maximum load is 1.5 kg.
Its aluminum and stainless steel construction keeps the mount compact, but for dynamic setups the product instructions advise attaching a safety rope to help prevent an accidental drop.
Best For: Creators who want a small clamp for a desk, rod, tube, or vehicle-mounted camera accessory.
| Pros | Cons |
|---|---|
|
|
This clamp fits creators who need a compact way to attach a small camera or accessory to a desk, rod, or tube. It includes both the dual ballhead setup and an action camera adapter, so it can handle more than one mounting style.
Check that the surface and gear suit the clamp and its 1.5 kg limit. For moving shots, account for the safety-rope guidance before mounting equipment.
Cold-Shoe Monitor Mount for 5- and 7-Inch Displays
SmallRig Field Monitor Mount Holder with Cold Shoe and 1/4" Inch Screw for 5 Inch and 7 Inch Monitor, with 360 Degree Swivel and 140 Degree Tilt, Rubber Cushion, Aluminum Alloy Build - BSE2346
This mount connects a field monitor to a camera or other support through a cold shoe, with a bottom 1/4-20 screw securing the monitor. It swivels 360 degrees horizontally and tilts 140 degrees vertically, providing room to adjust screen position.
Rubber cushions add friction and help protect the monitor from scratches. The CNC-machined aluminum mount supports 5- and 7-inch monitors weighing up to 1.2 kg.
A hex spanner is included alongside the mount. Check that your camera or rig has a compatible cold shoe before choosing this style.
Best For: Video shooters who need to attach a 5- or 7-inch field monitor to a camera cold shoe.
| Pros | Cons |
|---|---|
|
|
Pick this holder when a cold shoe is your preferred attachment point and you need a field monitor that can swivel and tilt. Its 1.2 kg limit and 5- to 7-inch fit provide concrete compatibility checks.
The cold shoe makes setup direct, while mounts built around ARRI locating points or a 1/4-inch base require a different interface. Confirm your monitor's size and weight and the support's shoe type before buying.
Cold-Shoe Monitor Support for Portrait and Landscape
SMALLRIG Camera Monitor Mount with Cold Shoe, 180° Tilt and 360° Swivel, Retractable 1/4" Locating Screw Anti-Twist, Damping Adjust, Horizontal & Vertical Shooting
The 6313 monitor mount slides into a cold shoe or hot shoe and locks in place for quick installation and removal. Its top uses a retractable 1/4-inch-20 locating screw, locating pins, and a silicone pad to help secure a monitor and reduce twisting or scratching.
The mount supports horizontal and vertical installations and offers 180-degree tilt plus 360-degree pan. A thumb knob adjusts tilt damping, and an included L-shaped Allen wrench provides additional tightening.
It also has a 1/4-inch-20 threaded hole on the bottom for accessories such as a magic arm.
Best For: Video creators who want tool-adjustable monitor positioning and quick cold-shoe attachment.
| Pros | Cons |
|---|---|
|
|
Choose this mount when quick shoe attachment and portrait or landscape positioning matter. It has a broad tilt range and an adjustable damping knob, but its supplied details do not give a supported weight limit.
Verify that your monitor stays within the mount's capacity before use. The retractable locating screw, pins, and silicone pad are relevant if twisting or surface contact is a concern.
ARRI-Style Mount for 5- or 7-Inch Monitors
SMALLRIG Monitor Mount EVF Holder Support with Locating Pins for ARRI Standard - 2174
The 2174 attaches a monitor to a cage or handle through a 3/8-inch threaded hole for ARRI standard. It fits 5- or 7-inch monitors up to 1.5 kg and adjusts through a rotation axis offering up to 146 degrees of movement.
A thumbscrew enables tool-free tightening and quick release, with a wrench hole available for additional tightening. If your cage lacks ARRI locating holes, a separate Mini Plate 2171 can create an attachment point through two 1/4-inch threaded holes.
Check your cage interface before buying, since that extra plate is optional.
Best For: Camera operators with an ARRI locating hole who need a monitor holder with hand-tightened rotation.
| Pros | Cons |
|---|---|
|
|
This mount suits rigs that already have an ARRI locating hole and a 5- or 7-inch monitor. Its 1.5 kg limit and 146-degree adjustment make compatibility straightforward to assess.
The main tradeoff is the attachment interface: a cage without ARRI locating holes needs the optional Mini Plate. Confirm the cage or handle connection and the monitor's weight before choosing it over a cold-shoe holder.
Bare Super Clamp for Threaded Accessories
SMALLRIG Super Clamp with 1/4 and 3/8 Thread for Cameras, Lights, Umbrellas
This standalone super clamp grips supports between 15 mm and 40 mm thick and offers both 1/4-inch and 3/8-inch threaded holes for attaching a compatible accessory. Rubber pads help reduce slipping and scratching at the clamp contact points.
It can mount to objects such as hooks, shelves, plate glass, and crossbars, making it useful for custom rig builds. The package contains one clamp, so plan for a separate arm or ballhead if your accessory needs angle adjustment or additional reach.
Check that the surface falls within the jaw range before buying.
Best For: Camera builders who need a standalone clamp with multiple threaded attachment points.
| Pros | Cons |
|---|---|
|
|
Choose this bare clamp if your rig already has a compatible accessory with 1/4-inch or 3/8-inch threads, or if you plan to add a separate arm. Its 15-to-40-mm jaw range is the key fit check.
Unlike bundled magic-arm kits, it does not provide positioning hardware, so the finished setup may need extra parts. That makes it useful for modular builds where you want to select the arm and head separately.
Handlebar Clamp for Action Cameras
SMALLRIG Camera Mount Clamp, Gopro Motorcycle and Bike Handlebar Mount Kit
This clamp kit includes a removable action camera adapter and offers 1/4-inch-20 and 3/8-inch-16 threaded holes for other compatible accessories. The clamp fits rods at least 14 mm in diameter and surfaces up to 65 mm thick, including bike and motorcycle handlebars, tripods, and tables.
A 360-degree ballhead supports portrait and landscape positioning. The maximum load at rest is 3.5 kg, but the motion guidance is much more restrictive: it specifies a maximum 350 g device, avoiding rough terrain, and staying below 50 km/h.
Follow those limits when using it on a moving vehicle.
Best For: Action-camera users who need a handlebar clamp and are prepared to follow the stated movement limits.
| Pros | Cons |
|---|---|
|
|
This is the most directly relevant option here for handlebar-mounted action-camera footage because it includes an adapter and a 360-degree ballhead. Pay close attention to the distinction between its at-rest load capacity and the much lower movement limit.
Check your device weight, handlebar dimensions, and planned riding conditions against the stated guidance. For stationary mounting, the available threaded holes also make it usable with other accessories.
How to Choose Camera Mounts
How We Picked Camera Mounts
Camera mounts solve different setup problems, so this roundup focuses on distinct attachment types and use cases: adjustable clamp arms for positioning gear, monitor holders for viewing angles, a bare threaded clamp for modular rigs, and a handlebar clamp for action cameras. Model-specific cages, grips, power accessories, and railblocks do not serve as broadly useful camera mounting supports, so they are excluded.
Start with what the mount must hold and where it attaches. A monitor holder needs to match the display's weight and the cage interface.
A clamp must fit the support surface, while a magic arm also needs an appropriate screw or locating interface at the device end. The included action camera adapter on some clamps can simplify that connection.
Comparing Camera Mounts by Setup
The main differences are reach, adjustment, attachment style, and payload. The 9.8-inch arm offers longer reach and 1/4-inch plus 3/8-inch clamp threads.
The 7-inch and 11-inch crab-clamp arms use retractable locating pins and support up to 1.5 kg; choose the shorter arm for a compact layout and the longer one when you need more distance. The 1138 clamp and the table-and-tube kit also include action camera mounting options.
For a monitor, match the base to your rig. The BSE2346 attaches by cold shoe and supports 5- and 7-inch displays up to 1.2 kg.
The 6313 slides into a cold or hot shoe and adds portrait and landscape installation, though its supported monitor weight is not specified here. The 2174 uses an ARRI locating interface, supports 5- or 7-inch monitors up to 1.5 kg, and may need an optional Mini Plate on a cage without that interface.
A bare clamp keeps a modular rig simple, but you need to supply any ballhead or arm separately. On the handlebar kit, distinguish the 3.5 kg at-rest capacity from its movement guidance: the device limit is 350 g, with restrictions on terrain and speed.
For any setup, check the clamp opening, attachment threads, and device weight before mounting.
| Product | Standout features | Best for |
|---|---|---|
| SMALLRIG Magic Arm Clamp KitCheck Price |
| Creators who need to position a small camera, monitor, light, or microphone on a table edge or round support. |
| SMALLRIG 9.8-Inch Magic Arm Clamp KitCheck Price |
| Filmmakers who want an articulating arm to place a monitor, microphone, or light away from its clamp point. |
| SMALLRIG 11-Inch Magic Arm ClampCheck Price |
| Vloggers and studio creators who need an adjustable arm for an action camera, monitor, light, or microphone. |
| SMALLRIG 7-Inch Magic Arm ClampCheck Price |
| Creators who want a shorter adjustable clamp arm for a light, monitor, microphone, or action camera. |
| SmallRig Cool Ballhead Arm Clamp 1138Check Price |
| Creators who want a small clamp for a desk, rod, tube, or vehicle-mounted camera accessory. |
| SmallRig Field Monitor Mount BSE2346Check Price |
| Video shooters who need to attach a 5- or 7-inch field monitor to a camera cold shoe. |
| SMALLRIG Camera Monitor Mount 6313Check Price |
| Video creators who want tool-adjustable monitor positioning and quick cold-shoe attachment. |
| SMALLRIG Monitor Mount EVF Holder 2174Check Price |
| Camera operators with an ARRI locating hole who need a monitor holder with hand-tightened rotation. |
| SMALLRIG Super Clamp with 1/4- and 3/8-Inch ThreadsCheck Price |
| Camera builders who need a standalone clamp with multiple threaded attachment points. |
| SMALLRIG GoPro Motorcycle and Bike Clamp KitCheck Price |
| Action-camera users who need a handlebar clamp and are prepared to follow the stated movement limits. |
Choosing a Camera Clamp or Magic Arm
A camera clamp anchors gear to a surface; a magic arm adds distance and angle adjustment. Match the jaw range to the actual support, such as a table edge, tube, tripod leg, or handlebar.
The standalone SmallRig clamp accepts surfaces from 15 mm to 40 mm thick, while some other clamps span a broader range. Cushions and anti-slip pads help protect contact areas, but they do not replace checking the fit and load limits.
For tighter camera rigs, compare arm length with the space available around the camera. A longer arm can place a monitor or light farther away, while a short arm can reduce clutter.
Also inspect the device-end connection: a 1/4-inch screw, retractable locating pins, cold shoe, and action-camera adapter are not interchangeable. Choose the mount that matches your gear without relying on an improvised connection.
Which Monitor Mount Fits Your Camera Rig?
First identify the mounting point on the cage or camera. Cold-shoe holders are convenient when the shoe is free.
ARRI-style mounts require a locating hole or a compatible adapter plate. Then check the monitor size and weight against the holder's supported range; the BSE2346 and 2174 provide specific monitor sizes and load limits, while the 6313 details positioning features but no maximum monitor weight.
Consider how you frame and adjust the display. Tilt and swivel ranges vary, and some models support portrait as well as landscape orientation.
If you often change angles, a thumb knob or tool-free adjustment can simplify repositioning. A mount with cushions or locating pins can also help protect the monitor and reduce twisting at the connection.
Who Should Buy Which Camera Mount?
Choose a clamp-and-arm kit if you need to position a small accessory off a table, tube, tripod, or rig. Pick the 9.8-inch arm for greater reach, or a 7-inch or 11-inch model when its length better suits your setup.
Choose the BSE2346 or 6313 for shoe-mounted monitor positioning, and the 2174 if your cage provides an ARRI-style locating interface.
For a modular build with an existing arm, the bare super clamp adds threaded attachment points. For handlebars, choose the 4102B clamp only after checking the movement limits against your device and riding conditions.
In every case, confirm the attachment points and load guidance before mounting valuable equipment.